Electronic smart locks have become extremely popular. You don’t ever need to worry about forgetting your key, and it is simple to set and change access codes at will. It’s easy to allow the babysitter or puppy walker have access only when needed, and you will never get stuck with a broken key. However, any lock can have difficulties. Below are some common issues for digital locks.
Battery Problems
To prevent leaving you locked out if there’s a power outage, most digital locks use batteries. If yours abruptly stops working, it might be a simple matter of having to change the batteries. Use your override key (if you have one), and then insert a fresh pair of batteries. In many cases, this will solve the problem.
Though you don’t have to remember to take a key, you need to bear in mind the code you set for the lock. Forgetting your code is particularly likely if you regularly change it. Reduce this risk by writing your code down someplace safe or noting it in your phone. If you end up in this situation, check the owner’s manual or contact the manufacturer. There is probably a way to reset the code.
Communication Errors
Sometimes, the keypad or touchscreen will stop communicating with the true lock. To fix this issue, remove the bolts for a minute and re-insert them. Most of the time, this will reset the lock and reestablish communication. If it fails, contact the manufacturer for assistance.
Even though they don’t use physical keys, digital locks nevertheless rely on physical locking mechanisms.
Frequent mechanical issues include:
Strike plate problems: The strike plate is the metal bit that the door latch sinks right into. If the strike plate isn’t perfectly aligned, there will not be a smooth entrance. Over time, the strike plate may come loose and sag to the point that the latch can’t function. Guarantee that the strike plate is straight and not tilted, then tighten the screws.
Hinge Problems: Many lock issues are in reality brought on by the door hinges. If the hinges aren’t properly attached, the door can slowly sag, eventually interfering with the alignment between the door latch and the strike plate.
Dirty or Unlubricated Lock: Door locks should be washed regularly using a damp rag, and simmer after a year with a dry lubricant. Gunk and debris can build up on the door latch and strike plate, which makes it impossible for the lock to function.
If you cannot fix the problem on your own, call a trusted locksmith. An experienced professional can diagnose and fix the issue with your electronic locks, fast gaining entrance to your home or business.
Ready to Begin?
If you’re ready to form a relationship with a dependable, reliable locksmith, contact Cheapest Locksmith today.